Welcome to Shenzhen Songhui Machine Equipment Co., LTD.

SERVICE HOTLINE

+86-755-23304430

Panasonic

Home>Product>SMT Pick And Place Machine>Panasonic

Product name:
Panasonic NPM-TT2
Product Feature
Basic Specification
Previous:
Panasonic Pick and place machine NPMD3
Next:
Panasonic SMT NPM-W2

Description

Specifications

Model ID
NPM-TT2
PCB
dimensions
(mm)
PC size
Single-lane mode
L 50 x W 50 ~ L 510 x W 590
Dual-lane mode
L 50 x W 50 ~ L 510 x W 300
M size
Single-lane mode
L 50 x W 50 ~ L 510 x W 510
Dual-lane mode
L 50 x W 50 ~ L 510 x W 260
PCB exchange time
Single-lane mode
4.0 s (With no component mounted on the reverse side of PCB)
Dual-lane mode
0 s* *No 0s when cycle time is 4.0 s or less
Electric source
3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA
Pneumatic source
Min.0.5 MPa, 200 L /min (A.N.R.)
Dimensions *1 (mm)
W 1 300*2 x D 2 798*3 x H 1 444*4
Mass
2 690 kg
(Only for main body:This differs depending on the option configuration.)

Placement head
Lightweight 8-nozzle head
(Per head)
3-nozzle head V2 *5
(Per head)
Placement speed
PC size
18 000 cph (0.20 s/chip)
7 200 cph (0.50 s/chip)
5 900 cph (0.61 s/QFP)
M size
17 460 cph (0.21s/chip)
6 984 cph (0.52 s/chip)
5 723 cph (0.63 s/QFP)
Placement accuracy
(Cpk1)
± 40 µm/chip
± 30 µm/QFP 12mm to 32mm
± 50 µm/QFP 12mm Under
±40 μm/ chip
±30 μm/ QFP
Component
dimensions
(mm)
0402 chip*6 to L 32 x W 32 x T 12
0603 chip to L 150 x W 25 (diagonal152) x T 30
Component
supply
Taping
Tape : 4 to 56 / 72 mm
Tape : 4 to 56 / 72 / 88 / 104 mm
Specifications for front/rear tray feeders : Max.52
Specifications for front/rear feeder carts : Max.120 (Tape:4, 8 mm)
Stick
Specifications for front/rear tray feeders : Max.12 (Single stick feeder)
Specifications for front/rear feeder carts : Max.28 (Single stick feeder)
Tray
Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20)

*1 : Only for main body
*2 : 1 820 mm in width if extension conveyors (260 mm) are placed on both sides
*3 : Dimensions shown are specifications for front/rear tray feeders . Dimensions of specifications for front/rear feeder carts : 2 893 mm
*4 : Excluding the monitor, signal tower and ceiling fan cover.
*5 : 3-nozzle head V2 cannot be installed on NPM-D3
*6 : The 0402 chip requires a specific nozzle/feeder.
*Placement tact time, inspection time and accuracy values may differ slightly depending on conditions.
*Please refer to the specification booklet for details.

Online Inquiry

  1. Purchase products:
  2. Contact:
  3. Tel:
  4. Email:
  5. Purchase title:
  6. Ordering instructions:

Related Products

CONTACT US

SFG Electromechanical Equipment Co., Limited

Ware house:Building7, Nanling road , Xinqiao street,Baoan distreet,Shenzhen HK address:RM517 NEW CITY CTR2 LEI YUE MUN RD KWUN TONG KLN,HONGKONG

+86-755-23304430

Jack +8617665603783

sfg@sfgsmt.com

SERVICE HOTLINE

+86-755-23304430

FOLLOW US

  1. Attention
    “Songhui”

Copyright 2019 SFG Electromechanical Equipment Co., Limited All Rights Reserved.